Customer Care Phone Number

Preventing Disconnection Issues: How to Install the T2 THROTTLE BASE II Cable Clamp

There is nothing worse than being in the final stages of an intricate flight mission or a critical landing approach only for your system to suddenly drop inputs. Flight simulation throttles are dynamic, heavily manipulated pieces of hardware. With constant lever pushing, pulling, and general desktop movement, the USB power cord takes a lot of abuse. Over time, slight tugs or vibrations can loosen the connection at the base, causing frustrating mid-game disconnections.If you own the T2 THROTTLE BASE II, you do not have to resort to taped cables or fragile setups. The device features a hardware-level solution specifically designed to eliminate this issue completely: a dedicated structural cable clamp.Here is your comprehensive guide to setting up the cable clamp to guarantee an uninterrupted, reliable connection every time you fly.

The Danger of Loose USB Cables

Standard USB connections are built for stationary electronics, not high-intensity flight simulation gear. When a throttle base is subjected to sudden inputs:

The USB port takes lateral physical strain, which can permanently damage the internal pins over time.
Minor tugs on the cord pull the connector away from its contact points, resulting in Windows chime alerts and lost controller detection mid-flight.
Cable wear accelerates, forcing you to purchase replacement cords prematurely.

The T2 THROTTLE BASE II resolves this vulnerability by ensuring the connection point remains completely isolated from external pulling forces.

Step-by-Step Guide: Installing the Cable Clamp

Securing your connection requires the dedicated clamp hardware from your accessory kit and only takes a minute to configure. Follow these steps for an optimal lock:

1. Prep the USB Cable

Take the provided USB cable and locate the side meant to interface directly into the rear or underside of the T2 THROTTLE BASE II.

2. Thread the Cable Through the Clamp

Locate the specialized plastic/metal cable clamp provided inside your accessory kit. Insert the USB cable directly through the center pathway of the clamp before plugging it into the base.

3. Plug and Align

Firmly insert the USB connector into the main port on the throttle base. Slide the cable clamp down the length of the wire until it seats flush against the designated mounting threads on the chassis of the base.

4. Tighten and Lock

Locate the Allen wrench (labeled T1) from your accessory kit. Line up the clamp screws with the base mounting points, and use the T1 wrench to tighten the clamp firmly onto the unit. Be sure not to overtighten, but secure it enough so that the clamp cannot wiggle or shift.Once installed, the clamp pinches and holds the cord tightly against the frame. If the wire is accidentally pulled or snagged during gameplay, the physical strain stops entirely at the clamp, ensuring zero force is transferred to the fragile USB plug or internal port.

Verifying the Setup via the LED Status Display

Once your cable clamp is locked down, plug the other end of the USB cord into your PC to ensure your hardware is getting a solid, steady connection. You can easily check the device’s connection integrity by looking at the built-in LED Status Display:

Operational Mode: If the connection is perfect, the green LED will flash slowly (at 1-second intervals) exactly 5 times, and then remain Steady ON. This means data and power are flowing perfectly.
Power Supply Only Mode: If the light flashes green 5 times and then turns completely OFF, your cable is securely drawing power, but your PC isn’t reading the simulator data line properly. Double-check the connection to your PC’s USB hub.

Conclusion

Hardware reliability should be the absolute least of your worries when navigating virtual skies. By utilizing the internal engineering of the T2 THROTTLE BASE II and taking a moment to secure the included cable clamp, you remove physical cable vulnerabilities entirely from your simulation environment. Break out your T1 Allen wrench, lock down that USB cord, and fly with the confidence of an uninterrupted connection.