When you are in the middle of an intense dogfight or executing a precise crosswind landing, the last thing you want is for your hardware to move. Yet, throttle slippage is one of the most common and frustrating pain points that flight simulation enthusiasts face. Because pilot throttle movements require physical pushing and pulling, a base that isn’t firmly anchored will slide, tilt, or lift off the desk entirely.If you are using the T2 THROTTLE BASE II, a shifting controller can ruin your immersion and cause costly errors in the cockpit. Fortunately, this device offers a robust solution designed to keep your setup locked in place. Here is a step-by-step guide to eliminating throttle slippage using the unit’s specialized mounting features.
The Problem: Why Desktop Slippage Destroys Realism
Flight simulation requires fine motor control. When your throttle base moves even a fraction of an inch during a maneuver:
- Your muscle memory is thrown off, leading to over-correction.
- Pushing the throttle to “Full” or pulling it back to “Park” can lift the entire unit if it lacks desktop stability.
- Physical sliding scratches your desk and distracts you from the screen.
The T2 THROTTLE BASE II weighs a solid 1.5Kg (3.32lb), providing decent natural heft. However, to counter heavy-handed adjustments or increased tension, utilizing the provided hardware mounting options is essential.
Step-by-Step Guide: Securing the T2 THROTTLE BASE II with Suction Cups
The accessory kit included with your device features dedicated suction cups designed to anchor the throttle firmly to flat surfaces. Follow these steps for an unyielding grip:
1. Prepare Your Hardware
Locate the suction cups and their corresponding screws from your accessory kit. Remove the screws from the suction cups before beginning the installation.
2. Thread the Bolts
Take the bolts and feed them directly through the designated mounting holes from the underside of the T2 THROTTLE BASE II.
3. Screw and Tighten
Align the suction cups with the protruding bolts on the bottom of the base and securely screw them on. Ensure they are tightened completely so there is zero play between the cup and the metal base plate.
4. The Critical Clean (Don’t Skip This!)
Suction cups rely on a vacuum seal to function. If there is dust, oil, or debris on your desk, air will leak in, causing the base to slip mid-flight.
- Thoroughly clean the bottom surface of the suction cups with a damp cloth.
- Wipe down your desktop or table surface until it is entirely free of dust and grease.
5. Position and Press
Place the unit down on your clean surface and press firmly over the areas where the suction cups are installed. This forces the air out, ensuring the base sticks tightly and firmly to your desk.
Pro-Tip: Balancing Friction and Stability
If you have manually increased your throttle’s mechanical friction using the internal screw adjustment, you will naturally need to apply more physical force to move the levers.If you notice the base lifting despite having the suction cups installed, try backing off the internal friction slightly by turning the designated screw counterclockwise using your T2 Allen wrench. Finding the perfect equilibrium between smooth lever travel and solid surface adhesion will give you the ultimate tactile flight experience.
Conclusion
You shouldn’t have to fight your hardware while trying to fly a plane. By properly installing the suction cups and prepping your desk surface, you can ensure that the T2 THROTTLE BASE II remains rock-solid, no matter how aggressively you handle the controls. Anchor your base today, stop the slipping, and keep your focus exactly where it belongs—on the horizon.
Customer Care Phone Number 
Leave a comment